Copyright © 2018, Juniper Networks, Inc.
Chapter 6: Contacting Customer Support and Returning the Chassis or Components
Securely tape the box closed.
10.
Write the Return Materials Authorization (RMA) number on the exterior of the box to
11.
ensure proper tracking.
Packing the JRR200 Route Reflector Components for Shipment
Follow these guidelines for packing and shipping individual components of the JRR200
route reflector:
When you return a component, make sure that it is adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
Use the original shipping materials if they are available.
Place the individual component in an electrostatic bag.
Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
CAUTION:
Do not stack any of the JRR200 route reflector components during
packing.
73