Safety Instructions; Requirement For Safe Use; Warning Symbols On The Device; Laws And Directives - Siemens SIPROCESS GA700 Quick Start Manual

Safety instructions

2.1

Requirement for safe use

In terms of safety, this device left the factory in perfect condition. In order to maintain this
status and to ensure safe operation of the device, observe these compact operating
instructions and all the information relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state and renew them, if required.
2.1.1

Warning symbols on the device

Symbol
2.1.2

Laws and directives

Observe the test certification, provisions and laws applicable in your country in the currently
valid version during connection, assembly and operation. These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
Additional provisions for applications in hazardous areas are, for example:
● IEC 60079-14 (international)
● EN 60079-14 (EU)
Additional information is available at:
Certificate (Page 137)
Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
Description
Consult operating instructions
Hot surface
Dangerous electrical voltage
2
11