Siemens SIPROCESS GA700 Quick Start Manual page 90

Commissioning
7.7 Commissioning the device
Setting analog output ranges
1. Call up submenu "04 Analog outputs":
Main menu > "1. Quick Start" > "04 Analog outputs"
The menu includes one navigation line for each of the five analog output ranges that can
be set:
2. Set the output current range of an analog output:
– Open the parameter field you wish to edit: Press <ENTER>.
– Authorize access with Standard PIN, if necessary.
– Set the analog output range according to the table below:
3. Repeat step 2 for all additional analog output current ranges.
90
Structure of the navigation line for each analog output range
Component name
Specified analog output
range [mA]
4 to 20 (NAMUR)
4 ... 20
0 ... 20
20 to 0
2)
20 to 4
2)
CTRL = Function check
1)
Inversion
2)
Measuring range limit
Normal operation [mA]
Low limit High limit
3.8 20.5
2 21
0 21
0 21
2 21
Compact Operating Instructions, 05/2018, A5E31805656-06
Analog output range
Fault/CTRL [mA]
1)
Low limit High limit
3 21.5
2 21
0 21
0 21
2 21
Quick Start