Table of Contents
Advertisement
2. Fill in the fields, using the information in the following table. The same fields are used for both 2.4 GHz and 5 GHz
configurations.
3. Click the
Apply
button in the
Field Name
Description
Enabled
Each radio is enabled by default. To disable a radio, click the
TX Power
Select the maximum rate at which transmission is allowed. Options range from 6 dBm (4 mw) to 30 dBm
(1000 mw).
Bandwidth Mode
2.4 GHz radio: Select the "high throughput" (HT) bandwidth mode for this device. Options are HT20 and
HT40 (MHz). The default is HT20.
5 GHz radio: Select the "very high throughput" (VHT) bandwidth mode for this device. Options are VHT20,
VHT40, and VHT80. The default is VHT80.
Enable Legacy Rates
To set the gateway to cut transmission briefly when changing channels, click the
useful for legacy WiFi clients, enabling them to connect more effectively to a new channel. This feature is
disabled by default.
Auto Channel
This feature is enabled by default. To disable automatic channel selection , click the
Channel
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Pending changes...
dialog box to save your settings.
field appears.
slide
button.
slide button
slide
. This is
button. The
64
Advertisement
Table of Contents
