Table of Contents
Advertisement
Field Name
Flash services profile
Log level
DNS MANAGEMENT
section
DNS management enabled
DNS refresh interval
SIP REGISTRATION OPTIONS
section
Dialtone Without Registration
Registration expiry
Registration attempts
Registration retry interval
Registration refresh percentage
SIP QUERY OPTIONS
section
Query enabled
Query frequency seconds
Query timeout (ms)
Use registration expire pct
Fail over max queries
Failed state query frequency
Failed state registration expire pct
CALL WAITING OPTIONS
section
Call waiting alert interval
Call waiting tone repetition
QOS
section
SIP
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Description
Selet which profile will be used for flashing devices. Options are North America and Digit
Directed A.
Select the degree of logging. Options are DTMF, Debug, Notice, Warning, and Error. The
default is Warning + Error.
This feature is disabled by default. To enable DNS management, click the
Select or enter how long between DNS refresh tasks. The default is 1800 seconds.
This feature is disabled by default. To enable a dial tone without SIP registration, click the
slide
button.
Select or enter the number of seconds by which a registration must be refreshed to remain
active. The default is 3600.
Select or enter the number of registrations attempts before the session is cancelled. The
default is zero (0) or unlimited.
Select or enter how long in seconds the gateway waits before retrying to register a SIP
connection. The default is 20.
Select or enter the percentage of the Registration Expiry value when the system will send a
refresh request.This is how long before expiration the request will be sent. The default is
zero (0).
This feature is enabled by default. To disable SIP queries, click the
Select or enter how long in seconds the gateway waits before retrying to send a SIP query.
The default is 600.
Select or enter how long in seconds the gateway waits before timing out a SIP connection.
The default is 2000.
Select or enter the percentage of the Registration Expiry value when the system will send a
refresh request. This is how long before expiration the request will be sent. The default is
zero (0).
Select or enter the maximum number of queries before failover is initiated. The default is 2.
Select or enter how long in seconds the gateway waits before retrying to send a SIP query.
The default is 300.
Select or enter the percentage of the Registration Expiry value when the system will send a
refresh request. This is how long before expiration the request will be sent. The default is
zero (0).
Select how often the call waiting alert will sound, in seconds. The default is 10.
Select how many times the call waiting alert will sound. The default is 2.
Select the priority level for SIP.
slide
button.
slide
button.
100
Advertisement
Table of Contents
