Table of Contents
Advertisement
Field Name
SIP DTMF mode
SIP CONFIGURATION
section
Session max expires
Session min interval
SIP codec table
SIP FEATURES
section
Three-way conference enabled
Caller ID enabled
Block caller ID delivery enabled
Call park
Call hold enabled
MESSAGE WAITING INDICATION
AMWI
VMWI
VMWI refresh interval (minutes)
MWI subscribe
MWI unsolicited notify
FAX/MODEM
section
T.38 fax
Fax passthrough
Modem passthrough
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Description
Select the Dual Tone Multi Frequency mode. Options are INFO, RFC 2833, inband, and auto.
The default is RFC 2833.
Enter the number of seconds that can elapse before a session is considered expired. The
default is 1800 seconds.
Enter the minimum interval for closing a conversation. This value must be 90 seconds or
greater. The default is 90 seconds.
The table lists 4 codecs in priority order.
To edit a codec selection, click the
the
SIP Codec
field, select the G.7xx codec that you want used. Then, click Accept.
This feature is disabled by default. To enable 3-way conferencing, click the
This feature is enabled by default. To disable the transfer features, click the
This feature is disabled by default. Click the
block the display of their caller ID for a single call. Options are:
On: Caller ID blocking is managed locally.
l
Off: Caller ID blocking is managed by the remote switch.
l
This feature is disabled by default. To enable call parking, click the
This feature is disabled by default. To enable call holding, click the
section
This feature is disabled by default. To enable the Active Message Waiting Indicator, click the
slide
button.
This feature is disabled by default. To enable the Voice Mail Waiting Indicator, click the
button.
Enter or select how long in minutes between checks for voice mail. This setting is in addition
to the interval set at the system level.
This feature is disabled by default. To enable the MWI subscription, click the
This feature is disabled by default. To enable the receipt of unsolicited messages, click the
slide
button.
This option instructs the gateway to accept faxes using the T.38 protocol. This feature is
disabled by default. To enable it, click the
This feature is enabled by default and allows faxes that do not use the T.38 protocol to be
received. To disable it, click the
This option allows modem signals to be transmitted using pulse code modulation (PCM)
packets. This feature is disabled by default. To enable it, click the
Edit
icon (
). The Edit SIP Codec dialog box appears. In
slide button
to enable users to temporarily
slide
button.
slide
button.
slide
button.
slide
button.
slide
button.
slide
button.
slide
slide
button.
slide
button.
97
Advertisement
Table of Contents
