Table of Contents
Advertisement
Field Name
Destination IP
Mode
Fields defined for using a service
Service Type
Service
Fields defined for configuring the rule manually
Public port/
Public port range
Protocol
Local port/
Local port range
Port Type
Enable Hairpin
4. Click Accept. The dialog box closes and the new mapping appears in the
5. To edit a mapping:
a. Click the
icon to the right of the mapping entry. The
b. Modify the fields as needed, and then click Save. The updated values appear on the page.
6. To disable a mapping, clear the checkbox that appears before the
page but is not active.
7. To remove a mapping, click the
8. Click the
Apply
button in the
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Description
This field is populated when a destination device is selected. To change this address, type a
different address in the field.
Select whether to use the settings defined for a service or to define the port settings manually.
Options are Select Service From List and Configure Manually. The default is Select Service From
List.
Select the type of service. The
Access, VPN, Messaging Telephone, and Audio and Video.
Select the service for the service type selected. The options vary by the type of service.
(Appears when Configure Manually is selected in the
number or range of numbers. Options are 1 - 65535.
(Appears when Configure Manually is selected in the
Options are UDP, TCP, and TCP + UDP.
(Appears when Configure Manually is selected in the
range of numbers. Options are 1 - 65535.
(Appears when Configure Manually is selected in the
port or a range of ports. If Port range is clicked, the
range
fields and the
Local port
To enable hairpin protocol, click the
Delete
icon (
) at the end of the row to be deleted. The rule is removed.
Pending changes...
dialog box to save your settings.
Service
field appears. Options are Server, Consoles, Remote
Mode
Mode
Mode
Mode
Public port
field changes to the
Local port range
slide
button.
Port Forwarding
Add/Edit Port Forwarding
Name
column. The mapping definition remains on the
field) Enter the applicable port
field) Select the correct protocol.
field) Enter the local port number or
field) Select whether to enter a single
field changes to the
Public port
fields.
list.
dialog box appears.
61
Advertisement
Table of Contents
