Management - ADTRAN SR905acv User Manual

Table of Contents

3. To enable the Voice feature, click the

4. Configure the tagging options:

a. In the

Tag mode

DQTagged. The default is Tagged.

b. If Tagged or DQTagged is selected, the

values are 1 - 4079. The default is 4. Enter the P-bit type. Options are 0 - 7. The default is 0.

c. If DQTagged is selected, the

will be accepted and mapped to the specified WAN. Valid values are 1 - 4062.

The default is 0.

5. In the

IPV4 Configuration

IPv4 WANs", or "PPPoE for IPv4 WANs".

6. In the

IPV6 Configuration

for IPv6 WANs".

7. Click the

Apply

button in the

Management

On this page, you can configure the settings for managing your network and the devices connected to it.

slide button

to the right of Enabled.

field, select the type of tagging that should be performed. Options are Untagged, Tagged, and

VLAN

CVID

field also appears. Enter the Customer VLAN ID or the first in a range of CVIDs that

section, configure the settings using the information in "DHCP for IPv4 WANs", "Static Address for

section, configure the settings using the information in "DHCPv6 for IPv6 WANs" and "Static Address

Pending changes...

dialog box to save your settings.

and

P-bit

fields appear. Enter the ID of the appropriate VLAN. Valid

Table of Contents