ADTRAN SR905acv User Manual page 31

1. To select a LAN client device, click
DHCP Static Association
2. When you select a connected host, the fields in the dialog box are populated with the necessary information. If the host is
currently offline or you select None in this field, you must enter the information manually.
3. Complete the fields, using the information in the table below.
4. Click Save changes to commit your changes.
5. To add another static DHCP configuration, repeat Steps 1-4.
6. To edit a static DHCP IP address, click the
needed and click Save Changes
7. To remove a static DHCP IP address, click the
8. Click the
Apply button in the
The fields in this dialog box are described in the following table.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
+ Add host to the right of the
dialog box appears.
Edit icon (
to commit your changes.
Delete icon (
Pending changes... dialog box to save your settings.
DHCP Static Associations
) next to it. The Add/Edit dialog box appears. Change the entries as
)next to it.
section heading. The Add/Edit
31