Table of Contents
Advertisement
1. In the left navigation bar, click
2. Click the button for the network for which you want to configure whitelist and blacklist addresses.
3. To enable filtering, click the
4. Select the Mode. Options are:
Blacklist: Disable wireless MAC address filtering.
l
Whitelist: Allow the wireless clients in the
l
Note: For this option to work, you must add at least one MAC address to this page.
5. To add a
MAC Address
a. In the
filtering
the pane. The Add MAC Address dialog box appears.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
WiFi
>
MAC
Filtering. The following page appears, showing the
slide button
next to Enabled.
MAC Address
to the filter list:
section for the band you want to configure, click the
list to access the wireless network. This is the default.
Add MAC manually
Primary
tab.
button at the right side of
68
Advertisement
Table of Contents
