c. If DQTagged is selected, the
will be accepted and mapped to the specified WAN. Valid values are 1 - 4062.
The default is 0.
5. In the
IPV4 Configuration
IPv4 WANs", or "PPPoE for IPv4 WANs".
6. In the
IPV6 Configuration
for IPv6 WANs".
7. Click the
Apply
button in the
Management
On this page, you can configure the settings for managing your network and the devices connected to it.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
CVID
field also appears. Enter the Customer VLAN ID or the first in a range of CVIDs that
section, configure the settings using the information in "DHCP for IPv4 WANs", "Static Address for
section, configure the settings using the information in "DHCPv6 for IPv6 WANs" and "Static Address
Pending changes...
dialog box to save your settings.
24