KaVo LUX 540 LED U Instructions For Use Manual page 71

▶ Insert the plug of the cable ceiling adapter into the jack X2.
▶ Connect the supply cable of the operating light to the terminal (U KaVoLUX
540), the polarity is irrelevant.
▶ Roll up excess lengths of the lines and clamp them with a cable tie.
Affix the covers
Note
When the ceilings are covered, use cover Mat. no. 07405992 .
▶ Remove the stud bolts from the small cover ① and pull the cover down.
▶ Affix the large cover ② to the small one with the stud bolt so that the stud
bolt points 6 O'Clock and shove it upward.
Instructions for use KaVoLUX 540 LED U / T
4 Assembly | 4.5 Ceiling assembly of the KaVoLUX 540 LED T
71 / 110
X 2