KaVo LUX 540 LED U Instructions For Use Manual page 40

Instructions for use KaVoLUX 540 LED U / T
4 Assembly | 4.3 Assembly of the KaVoLUX 540 LED U
▶ Route the control and supply cables through the unit to the central control
PCB and plug into the slot on the central control PCB ① (X12).
1
Final tasks
▶ Mount caps on the swinging and spring arm.
▶ Run function test.
▶ Perform the safety check according to the treatment centre.
▶ Mount the device covers.
Note
The KaVoLUX 540 LED U operating light is recognised automatically by the
E70/E80 Vision treatment centre. No further settings need to be made on the
treatment centre.
40 / 110