KaVo LUX 540 LED U Instructions For Use Manual page 30

Instructions for use KaVoLUX 540 LED U / T
4 Assembly | 4.3 Assembly of the KaVoLUX 540 LED U
▶ Ensure that the protective earth screw ⑥ and fastening screws ⑤ and ⑦ do
not reach into the light holder.
Note
When the mounting rod extends into the light holder, it can damage the
paint.
Screw in the depth stop screw ⑧ completely.
▶ Slide the cover ring ① onto the mounting pole ②.
▶ Insert the mounting pole into the lamp holder.
Positioning the mounting pole:
▪ It is approx. 1680 mm from the top edge to the floor
▪ The borehole for the swivel arm brake points in the direction 6 o´ clock
▶ Tighten the earth protector screw ⑥ and fastening screws ⑤ and ⑦.
▶ Return the disinfection container ④ to its former position and fix with
screws ③.
▶ Align the body of the unit so that the mounting pole is exactly vertical (see
device installation instructions).
Check with a spirit level.
▶ Push down the cover ring on the mounting pole.
30 / 110