KaVo LUX 540 LED U Instructions For Use Manual page 39

▶ Remove the cover ring ① and slide over the light mounting pole.
▶ Insert the mounting pole into the light holder up to the end stop ②.
▶ Align the mounting pole appropriately such that the borehole for the brake
points to the 6 o'clock position (6 o'clock position corresponds to the direc-
tion of the main switch of the unit).
▶ Adjust the mounting pole to the corresponding height and fix with locking
screws ③ and PE screw ④.
▶ Guide the cover ring ① on the unit body up to the end stop.
Note
The paint may be damaged if the mounting pole slips into the lamp holder.
Firmly hold the mounting pole when you insert it!
Make sure not to crush any cables.
Install the swinging arm
See also:
2 4.3.1.2 Install the swivel arm, Page 31
Connect the lines
▶ Screw the earth protector to the earth terminal ①.
Instructions for use KaVoLUX 540 LED U / T
4 Assembly | 4.3 Assembly of the KaVoLUX 540 LED U
39 / 110