decon E-Move MEM20 User Manual page 88

(2) Returning the turned anti-tip device to its original
position
Pull the lock knob and turn the anti-tip device downward
without touching the lock lever until you hear a click.
Move the anti-tip device back and forth and side to side
to ensure that it is locked in position.
Check that the safety wheels on the ends of the anti-
tip devices are 35-50 mm (1.4-2.0 inches) above the
ground when the casters and rear wheels are in contact
with the ground.
If the distance between the safety wheels and the
ground is not within this range, contact your dealership.
Check that the distance between the center of the
wheelchair back pipe (where the axles of the rear wheels
are installed) and the center of the safety wheels on the
ends of the anti-tip devices is 245 mm (9.7 inches) or
more. If the distance is less than 245 mm (9.7 inches),
contact your dealership.
Lock lever
Anti-tip device
Anti-tip device
245 mm
(9.7 inches)
35-50 mm
(1.4-2.0 inches)
10
81