Table of Contents
Advertisement
10. Wheelchair Disassembly and Adjustments
The E-Move has a variety of features to enhance its use and convenience. Use these features according
to your purposes. For information on the wheelchair frame to which E-Move is attached, see the owner's
manual from the frame manufacturer.
10.1. Removing and Installing the Unit
The power units of the E-Move can be removed from the frame when replacing the current wheels with
manual wheels or when transporting the wheelchair.
(1)
Removing the power units from the frame
Turn off the power and remove the battery. Put the protective cap on the removed battery.
Refer to "5.2. Removing the Battery" (pages 39 to 40).
‚ While turning the coupler ring at cable tip CCW and
pull out it upward.
10
ƒ Install the cap not to make dirt and water getting into
the coupler.
„ Place the wheelchair so that it will not become unstable
when the power units are removed.
… Release the parking brakes.
† While holding the hub with hand and pulling the middle
of the center ring "a" with your fingers, pull out each
power unit using both hands.
74
Coupler
Ring
Cap
Coupler
a
Advertisement
Table of Contents
