decon E-Move MEM20 User Manual page 102

Passenger transportation
using a wheelchair mounted with E-Move/E-Drive as a seat in vehicles
It is recommended that the user moves to a fixed seat in the vehicle and uses
the three-point safety belt
Decon Wheel AB is marketing the drive units E-Move and E-Drive which can be mounted on different
kinds of wheelchairs.
A crash test according to ISO 7176-19 has been performed for both E-Move and E-Drive by third part
using UNWIN restraint system. The test includes E-Move/E-Drive in combination with a manual
wheelchair. The purpose is to assure the security of the passenger in case the wheelchair is used as a
seat in vehicles. On the basis of the positive result of the test, transportation of the passenger in the
wheelchair equipped with E-Move/E-Drive can be allowed provided that
- the manufacturer of the wheelchair declares that the specific wheelchair is approved for
transportation of persons in vehicles according to ISO 7176-19,
- the combination of wheelchair and E-Move/E-Drive is documented by Decon Wheel
- the passenger in the wheelchair is using three-point safety belt,
- the wheelchair as well as the passenger shall be secured according to the instruction of the
wheelchair manufacturer,
- the combination shall be tensioned with straps according to ISO 10542,
- the power of E-Move/E-Drive is turned off or the battery is removed.
Finally, please observe that the local law of a country always shall be considered.
Hyltebruk, 2018-05-28
Benny Andersson
Site Manager
Appendix A