Table of Contents
Advertisement
… Place the power units in their normal position, and then
apply the parking brakes.
† In the case of quick connector
Align white-colored arrow mark on the cable side cou-
pler with another white mark printed on the wheel side
coupler (left or right wheel), insert the coupler until you
hear clicking sound.
10
Install the battery.
● When a person is sitting in the wheelchair, do not remove or install the wheels. The person
riding in the wheelchair or people around the wheelchair may be injured.
● After the power units are installed to the frame, be sure to check that the balls on the end
of each axle can be seen, and that the units will not come off if pulled. If the axles are not
secured, the axles could suddenly come off while the wheelchair is traveling and the wheel-
chair could tip over, causing serious injury.
76
● In the case of quick connector
White mark
Coupler
(wheel side)
White mark
a (connector)
outer ring
WARNING
Coupler
(cable side)
Cap
Advertisement
Table of Contents
