Table of Contents
Advertisement
(2)
Charging
Place the charger on a flat, stable surface with
the charge indicator lamp facing up.
‚ Insert the charger plug into the dedicated char-
ger (ESC3) and insert the power plug into the
residential power outlet.
Charger
ƒ Insert the battery into the charger as shown in
the diagram.
TIP
After plugging in the charger, it takes about 5 seconds for the charging lamp to light.
„ The charge lamp (green) on the charger turns
on, and the battery starts charging.
The capacity indicator lamps on the battery
flash, and the number of lamps that are lit
increases according to the charging level.
If the charge lamp (green) does not turn on,
and the refresh lamp (orange) flashes, refer to
"7.5. Refresh Charging the Nickel Metal Hydride
Battery (JWB2)".
Charger plug
Power plug
Residential power outlet
Battery
Charge lamp (green)
Charge lamp (green)
Power cord
Charger
Refresh lamp
(orange)
7
51
Advertisement
Table of Contents
