Installation With Mains Adaptor And Table Stand - oventrop R-Tronic RT B Operating Instructions Manual

Installation
pack and the 230 Volt connection in the flush socket.
2. Screw the fixing plate to the flush socket.
3. Switch on the electrical circuit.
4. Insert the R-Tronic into the fixing plate from above.
Illust. 5: Wall attachment of the fixing plate and flush-mounted power
pack
f The R-Tronic wireless thermostat is now ready for the teach in process
(see section 8.2.1 on page 22).
7.4

Installation with mains adaptor and table stand

CAUTION
Risk of fire due to overcharging of the batteries
If batteries are inserted into the R-Tronic and it is additionally con-
nected to the mains adaptor, there is a risk of overcharging of the
batteries.
f Never insert batteries into the R-Tronic if it is connected to the
mains adaptor.
1. Plug the mains adaptor connected to the table stand into a shockproof
socket (100-240 V ~/50-60 Hz).
2. Insert the R-Tronic wireless thermostat into the table stand from above.
f The R-Tronic wireless thermostat is now ready for the teach in process
(see section 8.2.1 on page 22).
20
R-Tronic with mote 320
115068283#EN-V01.05.2020