Colour Codes Of The Info Leds At The Mote 320 Wireless Actuator - oventrop R-Tronic RT B Operating Instructions Manual

R-Tronic with mote 320
MOTOR BLOCKED
MOTOR DEFECT
POWER SUPPLY DEFECT
TIME PROFILE INVALID
RADIO DISTURBANCE
ENOCEAN ERROR
H-SENSOR DEFECT
CO2 SENSOR DEFECT
HIGH PPM
KEY DEFECTIVE
10.3

Colour codes of the info LEDs at the mote 320 wireless actuator

The following colour codes are shown on the mote 320 wireless actuator.
3x green (slow)
3x red (slow)
1x red (every 50 seconds)
1x green (short)
5x green (fast)
2x red and green alternately
115068283#EN-V01.05.2020
Stem (motor operated) of the mote
320 actuator blocked.
Drive motor defective.
Temporary poor power supply.
Incorrect programming of individual
time profile.
Radio communication disturbed.
Possible error at installed wireless
module.
Humidity sensor in the R-Tronic RTF
B / RTFC K defective.
CO2 sensor in the R-Tronic RTFC K
defective.
CO2 value higher than 2,000 PPM.
Button at the R-Tronic does not trig-
ger a function (contact problem).
Teach in/teach out process or
calibration run successful
Teach in/teach out process or
calibration run not successful
Error message (e.g. batteries
empty)
Teach in/calibration button pressed
for at least 2 seconds
Stem retracted successfully (for
removal)
Factory settings restored success-
fully
Malfunctions
33