Heating Profile On; Heating Profile Off; Heating Profile Day/Night - oventrop R-Tronic RT B Operating Instructions Manual

R-Tronic with mote 320
9.2.1

Heating profile ON

When the R-Tronic is put into operation, a default profile is always effective,
which regulates the room temperature constantly to 20 °C (continuous
heating mode = PROFILE ON). The R-Tronic display signalises the activation
of this default profile with a continuous line below the time bar over the full
24-hour scale (display additionally shows MANU):
Illust. 8: Default heating profile
9.2.2

Heating profile OFF

If you do not wish continuous heating to a fixed temperature, switch off the
default heating profile.
1. Go to the MAIN MENU (see section 8.1 on page 22).
2. Select the menu option TIME PROFILE.
3. Select the menu option PROGRAMME SELECTION.
4. Select the menu option PROFILE OFF.
The R-Tronic display no longer shows the continuous line below the
time bar (continuous setback temperature). The operating mode
MANU remains displayed.
9.2.3

Heating profile DAY/NIGHT

The day and night heating profile allows you automatically control the tem-
perature to fixed values at daytime (6 h to 22 h) or night time (22 h to 6 h)
1. Go to the MAIN MENU (see section 8.1 on page 22).
2. Select the menu option TIME PROFILE.
3. Select the menu option PROGRAMME SELECTION.
4. Select the menu option PROFILE DAY/NIGHT.
The R-Tronic now regulates the room temperature during the day
to your selected comfort temperature and at night to your selected
setback temperature. Switching takes place at the a.m. times. On
the R-Tronic display, a line ("comfort phase") appears below the 24-
hour scale on the time bar between the figures 6 and 22.
When the PROFILE DAY/NIGHT is activated, the operating mode
display jumps from MANU to AUTO.
115068283#EN-V01.05.2020
Operation
27