Toshiba Smart Manager Engineering Book page 22

Smart Manager
4-3-3. Energy monitoring relay interface installation method and
orientation
There are five installation methods for this relay interface as shown below: surface mount and wall mounts.
Use the attached screws.
REQUIREMENT
Do not install the unit in any of the following places.
• Humid or wet place
• Dusty place
• Place exposed to direct sunlight
• Place where there is a TV set or radio within one meter
• Place exposed to rain (outdoors, under eaves, etc.)
4-3-4. Installation space and maintenance space
A side space for connecting through cable inlets and an upper space for
maintenance must be reserved before installation.
The other sides can be adjacent to surrounding objects.
Engineering Book
No good
100 mm
100 mm
22 -EN