Toshiba Smart Manager Engineering Book page 7

Smart Manager
1-2-2. System configuration (Optional)
System image
PC (Locally procured)
Alarm output
Run output
Fire alarm input
All start input
All stop input
Power
distribution
supported
Max 4
Per Unit
Option
Digital Input/
Output
supported
Max 4
Per Unit
Option
7 -EN
Power can be distributed for each indoor unit (*).
Indoor unit can be controlled by external signals.
TCC LINK
2 lines of Line 64
can be connected
LAN
TCC LINK
TCC LINK
Smart Manager
RS-485
Energy Monitoring
Power Meter
Interface
Power Meter
Energy Monitoring
Power Meter
Interface
Power Meter
Demand
Digital Input/
Fire alarm
Output interface
Door-Lock
Error output
Digital Input/
Will eliminate worries about introducing the power
Output interface
distribution system.
Managing from inspection to aggregation simultaneously will reduce
management and costs!
Can set any zone of 1 to 128 units!
(Up to 32 users, Up to 4 units can be accessed simultaneously)
• WAN
Wide Area Network: Network that connects remote Local Area Networks (LAN)
using a telephone line or ISDN
·Cannot be connected via the above network for security reasons
Outdoor unit
Up to 16 (Header) units can
be connected in one line
(2 lines in total)
Up to 32 units
Up to 8 Power Meter
Up to 8 Power Meter
Input Max 8
Output Max 4
Complicated system
configuration
●
Daily / Monthly Report creation function
Can distribute electric power to each indoor unit using Energy
Monitoring Relay Interface.(*)
●
Linkage to external signals
Can stop the indoor unit (can stop all units simultaneously) by lock
linkage or fire alarm signal using Digital Input/Output Relay Interface.
* In the case of group operation of the VRF indoor units, power is
distributed by group.
Power cannot be distributed to the indoor follower unit in the DI/SDI
indoor unit group.
Engineering Book
Indoor unit
Up to 64 units can be
connected in one line
(2 lines in total)
Up to 128 units
High initial cost