Toshiba Smart Manager Engineering Book page 35

Smart Manager
<DS25>
<1> Always OFF
• Always set this bit to OFF.
<2> Synchronization of zone setting data
OFF: With synchronization
ON: Without synchronization
This bit specifies whether to perform synchronous communication of zone setting
data between Smart Managers.
* When this bit is set to ON (without synchronization), synchronous communication
is not performed, and when zone setting is made, the data is not reflected in other
Smart Managers.
<3> Always OFF
• Always set this bit to OFF.
<4> Fire alarm input switching (Set this switch to match the fire alarm input connection set in chapter 4.)
Set OPEN or CLOSE input junction pegged to fire alarm.
• OFF: Set CLOSE input junction pegged to fire alarm.
COM-DI
• ON: Set OPEN input junction pegged to fire alarm.
COM-DI
-EN
35
DI3
(Normal)
DI3
(Normal)
Factory setting: All OFF
COM-DI
DI3
(Fire alarm)
COM-DI
DI3
(Fire alarm)
Engineering Book
DS25
ON
1 2 3 4
OFF