Toshiba Smart Manager Engineering Book page 59

Smart Manager
8-1-2. Indications on the LCD panel
A
Q
P
O
N
ALL ZONE GROUP
A: / /
B: Line number
C: Zone number
D: Group number
E: Operation mode
F: Temperature
G: Air volume
-EN
59
B C
M K L
,
The selected line number, zone number or group number is displayed.
1.2
1~64
1~64
Connected groups are automatically recognized and displayed.
When a group is specified with the
Flashing: Shows the group whose settings are displayed on the panel.
Lighting: Shows selected groups.
Underline: Shows that the group is operating.
The underline flashes when an alarm occurs.
The current operation mode is displayed.
AUTO
:
* When
COOL
operation mode is disabled.
The set temperature is displayed.
AUTO
One of
D E
J I H G
, or is displayed.
When a line is selected, the ( ) mark of the selected line number
flashes.
The number lights up when any controllable unit is detected on
the line.
When both line 1 and line 2 are selected, the line of the
flashing ( ) mark is displayed.
The underline lights when there is at least one operating
air conditioner on the line.
The underline flashes when an alarm occurs.
GROUP
HEAT DRY COOL
: :
lights when the button is pressed, switching of
HEAT MED. LOW
, , ,
Engineering Book
button, it is displayed like
FAN
: :
HEAT
FIXED
, or is displayed.
F
.
and