RGBlink D4 User Manual page 17

6. Effects: users can set output image effects here.users can set output image effects here. To open
up Effect menu, just press Effect button
Layer: Layer 1 or 2.
Layer option is available under the system mode of Dual, Split and Mini Delay
Under mode of Standard and Switch, there is no Layer in Effect menu
Brightness: ranging from -1024 to 1024, users can not only adjust the overall brightness but also
the brightness of R,G,B, each ranging from -1024 to 1024
Contrast:range from 0-399
Chroma:range from 0-399
Black&White: On/Off
Hue: rang from -180 to 180
Color Temp:rang from 6500K to 9300K
Gamma: select from Gama 1.0, Gamma 1.8, Gamma 2.2, Gamma 2.6
H Sharpness: adjust horizontal sharpness, rang from -10 to 10
V Sharpness:adjust vertical sharpness, rang from -10 to 10
Noise Reduction
HDCP 2.X, UHD, 4K, HDR10, HLG, HDMI 2.0, DP 1.2, HDMI 2.1, DP 1.4, 6G SDI, 12G SDI, H.264, H.265
D4
on the front panel.
Layer 1
Brightness >>
Contrast >>
Chroma >>
Black&White OFF
>Brightness 1024
Brightness R 1024
Brightness G 1024
Brightness B 1024
Hue 180
Color Temp 6500K
Gamma Gamma 1.0
H Sharpness
V Sharpness
Noise Reduction >>
Flip V OFF
Flip H OFF
Reset OFF
User Manual
0
0
17