Chapter 2 Install Your Product; Plug In Signals; Plug In Main Power; Turn On Your D4 - RGBlink D4 User Manual

Chapter 2 Install Your Product

2.1 Plug in Signals

Connect input signals and output display to the product before all devices are powered on.
Tighten connector screws/locks where provided.
Please use cable that can support HDMI 2.0 or DP 1.2 to ensure 4K@60Hz input
and output.

2.2 Plug in Main Power

Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.

2.3 Turn on Your D4

The device will enter to the boot interface, and OLED display will show as below,
completing initialization before loading last settings and input/output configuration.
HDCP 2.X, UHD, 4K, HDR10, HLG, HDMI 2.0, DP 1.2, HDMI 2.1, DP 1.4, 6G SDI, 12G SDI, H.264, H.265
D4 User Manual
12