Connecting External Devices; Connecting External Monitor - JVC Connected Cam GY-HC550U Instructions Manual

Connecting External
Monitor
To output live or playback video images and
0
audio sound to an external monitor, select the
output signals from the camera recorder, and
connect using an appropriate cable according to
the monitor to be used.
Choose the most suitable terminal according to
0
the monitor in use.
[SDI OUT] terminal:
0
Outputs either the 3G-SDI/HD-SDI signal or SD-
SDI signal.
[HDMI] terminal:
0
Outputs HDMI signals.
Memo :
If the [SDI OUT] terminal or [HDMI] terminal is
0
connected, configure the settings in the [A/V
Set] menu according to the monitor to be
connected.
(A P130 [ SDI OUT ] )
(A P131 [ HDMI OUT ] )
To connect the output signal in the 4K(2160p)
0
setting, use a Premium High Speed HDMI cable
(supports 18Gbps).
When connecting in the 4K(2160p) 59.94p or
50p setting, it is recommended that the cable
used does not exceed 2 m.
SDI IN
.
* Select the output signal in [A/V Set] B [SDI
OUT]/[HDMI OUT].
(A P130 [ SDI OUT ] )
(A P131 [ HDMI OUT ] )
* When [Record Format] B [System] is set to "SD",
only SD-SDI signals are output.
(A P149 [ System ] )
* To display the menu screen or display screen on
the external monitor, set [A/V Set] B [Video
Set] B [SDI OUT] B [Character] to "On".
(A P130 [ Character ] )
Connecting via SDI
Digital video signals, together with embedded
0
(superimposed) audio signals and time code
signals, are output for both the 3G-SDI/HD-SDI
and SD-SDI signals.
Memo :
The sampling frequency for embedded
0
(superimposed) audio signals is 48 kHz. Time
code of the built-in time generator as well as
playback time code are also output.

Connecting External Monitor

HDMI
175