Error Messages And Actions - JVC Connected Cam GY-HC550U Instructions Manual

Error Messages and Actions

Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as
follows according to the error status.
Memo :
This camera recorder makes use of a microcomputer. Noise interference from external sources may
0
prevent it from functioning properly. When this occurs, turn off and on the power of the camera recorder
again.
Error Message
Turn Power Off Turn
Back On Later
Fan Stop Detected
Please Turn P.Off
Fan Maintenance
Required
Getting Overheated.
Please Turn Power Off.
Rec Inhibited
Lost Media Info *
Status
System error.
* The warning tone sounds and the
tally lamp blinks twice every
second.
The fan stopped running.
0
Usage time of the fan has exceeded
9000 hours.
The battery has exceeded the
0
specified temperature.
The power turns off
0
automatically after about 15
second.
[REC] button is pressed when the
write-protect switch of the SD card
is set.
Card is removed while recording
0
is in progress.
Card is removed while
0
formatting is in progress.
Card is removed while restoring
0
is in progress.
Card is removed while adding
0
the OK mark.
Card is removed while writing a
0
setup file.
Card is removed while deleting a
0
clip.
(*: A, B)
Action
Turn off the power, and turn it on again.
If the error persists, please contact the
local dealers in your area.
Please contact the local dealers in your
area.
Check the fan and replace accordingly.
For more details, please contact the local
dealers in your area.
Memo :
You can check the usage time of the
0
fan in [System] B [System
Information] B [Fan Hour].
(A P149 [ Fan Hour ] )
Wait until the temperature drops or
0
replace the battery.
If the error persists, please contact the
0
local dealers in your area.
Turn off the write-protect switch of the SD
card, or insert a recordable SD card.
(A P48 [Recording Media] )
Restore the card using this camera
recorder.
(A P52 [Repairing the Recording
Media] )
Error Messages and Actions
231