JVC Connected Cam GY-HC550U Instructions Manual page 119

9 Level
The amount of correction can be specified
separately when [Gamma] is set to "Standard",
"Cinema 1" or "Cinema 2".
When [Gamma] is set to "Standard"
[Setting Values: 0.35 to R 0.45 to 0.55 (in steps of
0.02)]
Increase the number:
0
Finer gradation at bright areas and coarser
gradation at dark areas.
Decrease the number:
0
Finer gradation at dark areas and coarser
gradation at bright areas.
When [Gamma] is set to "Cinema 1" or "Cinema 2"
[Setting Values: +5 to R 0 to -5]
Increase the number:
0
Finer gradation at dark areas and coarser
gradation at bright areas.
Decrease the number:
0
Finer gradation at bright areas and coarser
gradation at dark areas.
Memo :
When [Gamma] is set to "Standard" with the
0
value set at [0.45], the gamma adjusted
conforms to ITU709 or ITU2020.
If [Gamma] is set to "Cinema 2", the maximum
0
peak signal decreases from 109% as the
number becomes smaller in the setting values
from 0 to -5. When the level is at -5, the video
input with a dynamic range of 400% will be kept
within a 100% output.
This item cannot be configured when [Color
0
Space] is configured to "HLG" or "J-Log1".
This item cannot be configured when [Infrared]
0
is set to "On".
Detail
For adjusting the contour (detail) enhancement
level.
Increasing the value increases the sharpness of
the contour.
[Setting Values: +10 to -10, Off]
(Default Value: -6 for "J-Log1" and "HLG" of Color
Space; 0 for all other settings)
Memo :
The setting values of this item and [Adjust...] are
0
stored separately when [Color Space] is set to
"HLG" or "J-Log1".
This item cannot be configured when [Infrared]
0
is set to "On".
9 Frequency
For specifying the correction frequency of the
contour. Set this according to the object.
High:
0
Emphasizes the high frequency range. Use this
when shooting objects with fine patterns.
Middle:
0
Emphasizes the intermediate frequency range.
Low:
0
Emphasizes the low frequency range. Use this
when shooting objects with large patterns.
[Setting Values: High, RMiddle, Low]
Memo :
Available when [System] is set to "4K EXT
0
(SSD)" or "4K".
This item cannot be configured when [Infrared]
0
is set to "On".
Master Black
For adjusting the pedestal level (master black) that
serves as the reference black.
Increasing the value increases the pedestal.
[Setting Values: +50 to -50 (R-3)]
Memo :
This item cannot be configured when [Color
0
Space] is set to "J-Log1".
The setting value of this item is stored separately
0
when [Color Space] is set to "HLG".
This item cannot be configured when [Infrared]
0
is set to "On".
Camera Process Menu
119