Starting Distribution - JVC Connected Cam GY-HC550U Instructions Manual

Starting Distribution

1 Perform the necessary setting for the
decoder and PC application.
For details on the settings, please refer to the
"INSTRUCTIONS" of the respective devices
and applications.
Memo :
If there is an NAT router within the
0
communication path between the camera and
the decoder, port forwarding setup is required.
For details on the settings, please refer to the
"INSTRUCTIONS" of the router in use.
The following parameters are required when
0
connecting to this camera recorder using the
RTSP/RTP.
Port number: 554
Stream ID: stream
Use the following to access via URL.
0
rtsp://<IP address of the camera recorder>:554/
stream
2 With the network connection established,
set [Live Streaming] to "On".
(A P178 [Preparing Network Connection] )
Set [Network] B [Live Streaming] B [Live
0
Streaming] to "On".
The network connection mark appears on the
0
display screen when a network connection is
established.
(A P162 [Network Connection Icon] )
208
Performing Live Streaming
Memo :
You can also assign "Live Streaming" to a user
0
button.
(A P46 [Assignment of Functions to User
Buttons] )
You can view the status of distribution on the
0
LCD monitor.
(A P164 [Live streaming mark] )
Icon
Distribution in progress (good
connection quality)
Blinks when distribution starts or
.
(Red)
stops
Distribution in progress (poor
connection quality)
.
(Red)
Waiting for connection (during
RTSP/RTP) or connection failed
.
(Yellow)
When the 5 icon is displayed, you can view the
0
details of the error on the [Streaming] screen of
the status screen.
.
(A P234 [List of Live Streaming Error Displays] )
Caution :
Streaming may be interrupted temporarily 24
0
hours after the process started.
Status
Cause of Error