Mismatch Fiber Number; Core Bubble Error - UCL SWIFT KR12A User Manual

7.7 Mismatch Fiber Number

It is displayed when the number of fibers is not consistent with opposite side.
How to: Check all the fibers are placed on the V-Groove.
How to: Make sure broken fibers.
How to: Check the splice mode is being used properly.

7.8 Core Bubble Error

It is displayed when bubbles or dots exist in the spliced part after completing the
splice.
How to: Check the condition of the cleaver.
How to: Clean the V-groove.
How to: Check the condition of the electrode.
91