Vii.error Message; Too Dirty Fiber; Replace The Fiber In The Correct Position - UCL SWIFT KR12A User Manual

VII. Error message

7.1 Too Dirty Fiber

It is displayed when the fiber prepared for splice is contaminated more than normal
status.
How to: Reset the fiber after cleaning.

7.2 Replace The Fiber In The Correct Position

It is displayed when the fiber is not placed in the middle of the electrodes and V-
groove or the objective lenses or reflection mirror is contaminated.
How to: Press and place the fiber in the middle of the electrodes and V-
groove.
How to: Check the condition of the lenses and reflection mirror and remove any dirt.
88