Too Long Fiber; Fiber Over Angle - UCL SWIFT KR12A User Manual

7.3 Too Long Fiber

It is displayed when the fiber is placed too close to the electrode, the lenses or
reflection mirror is dirty or LED light is not bright enough.
How to: Press
How to: Remove dust and dirt from the lenses and reflection mirror.
How to: Conduct an LED test. If an error occurs, contact UCLSWIFT Co., Ltd.

7.4 Fiber Over Angle

It is displayed when the measured cleaving angle of the fiber is greater than the limit.
How to: Reset the fiber after checking the condition of the cleaver.
How to: Check the value of the cleaving angle.
and place the fiber again.
89