Table of Contents
Advertisement
4.7
Cleaving the fiber
i. Place the stripped fiber on the V-groove of the cleaver and check the length
to cleave the fiber. Separate the each fiber when using the ribbon fiber. If
the each fiber is not separated, it can make the problem on the cleaving.
ii. Pull down and press the cover to cleave the fiber.
iii. Lift the cover and take out the cleaved optical fiber.
iv. Remove the fiber fragments and dispose it in a proper container.
Please read user manual of the cleaver for more detailed information about the
operation of the cleaver.
36
Advertisement
Table of Contents
