Timers; Date And Time - DPS Telecom NetGuardian LT G2 User Manual

12.16

Timers

The Timers are user-definable, and allow you to choose the intervals between automatic refreshing of the
NetGuardian LT G2 Web Browser. Enter the amount of time, in seconds (sec) or minutes (m), in the value field
and click Save.
12.17

Date and Time

Date
Time
Enable NTP
NTP Server Address
or Host Name
Time Zone
Enable DST
Start Day
End Day
Fig. 12.16.1 The Provisioning > Timers menu
Fig. 12.17.1 The Provisioning > Date and Time menu
Time Settings
Select the current month, day, and year from the drop-down menus.
Select the current hour, minutes, and time of day fro the drop-down menus.
Automatic Time Adjustment (NTP)
Check this box to enable Network Time Protocol.
Enter the NTP server's IP address or host name, then click Sync.
Example: north-america.pool.ntp.org
Select your time zone from the drop-down menu.
Adjust Clock for Daylight Savings Time (DST)
Check this box to have the NetGuardian LT G2 observe Daylight Savings.
Select the month, weekday, and time when Daylight Savings will begin.
Select the month, weekday, and time when Daylight Savings will end.
61