DPS Telecom NetGuardian LT G2 User Manual page 52

46
Phone Number to Call
Delay
Call all numbers in this
list. Ack logic is
disabled.
Extended call loop.
TRIP Dialup(T/Mon) Notification Fields
T/Mon Phone Number Enter the phone number for your T/Mon unit
Only dial if DCP poller
inactive alarm is set
Note: T/Mon will need to have a "^" at the begining of the dialing string for data calls to function properly (Ie.
^9,15594541600).
Call Notification
The phone number the NetGuardian LT G2 should call when sending call
(voice) notifications.
The amount of time that will pass before the NetGuardian LT G2 will
call the next person on the assigned call list. Enter s for seconds or m for
minutes. Example: 45s = 45 seconds.
Forces the NetGuardian to call everyone on the assigned call list,
disabling their ability to ack the alarm and stop the phone tree process.
If checked, all configured phone numbers will be dialed (in the order
entered) five times or until the alarm is acknowledged.
Fig. 12.6.1.4 Editing Call notification settings
Call Notification
Check this box if you want the Netguardian to only dial if the DCP poller
inactive alarm is set