Legal Notices - Renishaw ATOM DX Installation Manual

Legal notices

Copyright
© 2017– 2020 Renishaw plc. All rights reserved.
This document may not be copied or reproduced in whole or in part, or transferred to any other media or
language by any means, without the prior written permission of Renishaw.
Trade marks
RENISHAW and the probe symbol are registered trade marks of Renishaw plc. Renishaw product
®
names, designations and the mark 'apply innovation' are trade marks of Renishaw plc or its subsidiaries.
Other brand, product or company names are trade marks of their respective owners.
Patents
Features of Renishaw's encoder systems and similar products are the subjects of the following patents
and patent applications:
CN1314511 EP1469969
US8987633 US8466943
JP5017275 US7624513
US7839296 CN105008865
EP3465099 US2017203210
Disclaimer
WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT
AT PUBLICATION, ALL WARRANTIES, CONDITIONS, REPRESENTATIONS AND LIABILITY,
HOWSOEVER ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW.
RENISHAW RESERVES THE RIGHT TO MAKE CHANGES TO THIS DOCUMENT AND TO THE
EQUIPMENT, AND/OR SOFTWARE AND THE SPECIFICATION DESCRIBED HEREIN WITHOUT
OBLIGATION TO PROVIDE NOTICE OF SUCH CHANGES.
Terms and conditions and warranty
Unless you and Renishaw have agreed and signed a separate written agreement, the equipment and /or
software are sold subject to the Renishaw Standard Terms and Conditions supplied with such equipment
and /or software, or available on request from your local Renishaw office.
Renishaw warrants its equipment and software for a limited period (as set out in the Standard Terms
and Conditions), provided that they are installed and used exactly as defined in associated Renishaw
documentation. You should consult these Standard Terms and Conditions to find out the full details of
your warranty.
Equipment and /or software purchased by you from a third-party supplier is subject to separate terms and
conditions supplied with such equipment and /or software. You should contact your third-party supplier for details.
ATOM DX
linear installation guide
EP2390045 JP5002559
CN101300463 EP1946048
CN101310165 EP1957943
US9952068 CN109477736
Product compliance
C
Renishaw plc declares that ATOM DX ™ complies with the applicable standards and regulations. A copy of the
EU Declaration of Conformity is available from our website at www.renishaw.com/productcompliance.
ATOM DX cabled readhead compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or authorised
representative could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with
the unit to ensure compliance.
ATOM DX top exit readhead compliance
The ATOM DX top exit readhead has been designed as a system component and to be compliant with EMC
regulations for products of its type. Care must be taken with shielding and grounding arrangements to ensure
EMC performance once installed. It is the system integrator's responsibility to implement, test and prove EMC
compatibility for the whole machine
Further information
This further information relating to the ATOM DX encoder range can be found in the ATOM DX
encoder system Data sheet (Renishaw part no. L-9517-9736), Advanced Diagnostic Tool ADTi-100 Data
sheet (Renishaw part no. L-9517-9699), Advanced Diagnostic Tool ADTi-100 and ADT View software User
guide (Renishaw part no. M-6195-9413) and Advanced Diagnostic Tool ADTi-100 and ADT View software
Quick-start guide (Renishaw part no. M-6195-9321). These can be downloaded from our website at
www.renishaw.com/atomdxdownloads and are also available from your local representative.
miniature
™
1