Programming/Main Menu; Main Menu; Quick Start - KROHNE ALTOSONIC UFM 610 P Installation And Operating Instructions Manual

3.

PROGRAMMING/MAIN MENU

Switch on...
3.1

Main menu

Press SCROLL up or down to move cursor to required option, then
press ENTER to select.
3.2

Quick start

Selecting quick start offers the user the easiest option to achieve flow measurement. If the instrument has been used previously,
it stores the last QUICK START application data, which can accessed via the MAIN MENU option Read flow. This allows
the user to measure the same application without spending time entering new data.
If QUICK START is selected, proceed with the following routine.
Use the scroll keys to select, then press ENTER.
The instrument now asks for the Pipe outside diameter?
After entering the outside diameter press ENTER.
KROHNE
Press 0 for English
Press 1 for French
Press 2 for German
Press 3 for Spanish
Serial 0000 v 2.00
MAIN MENU
Quick start
View/Edit Site Data
Select sensor set
Data Logger
Set up RS232
Set up UFM 610 P
Read flow
QUICK START
Select the dimension units:
Millimetres
Inches
QUICK START
Dimension units
Pipe outside diameter?
yy-mm-dd hh:mm:ss
yy-mm-dd hh:mm:ss
yy-mm-dd hh:mm:ss
MILLIMETRES
58.0
16