Data Logger (See Also Keypad Options-Data Logger) - KROHNE ALTOSONIC UFM 610 P Installation And Operating Instructions Manual

3.4.4 Exit and select default sensor
Selecting EXIT will take you back to MAIN MENU.
3.5

Data logger (see also KEYPAD OPTIONS-data logger)

The data logger can be accessed when in flow mode via the keypad or from the main menu. Accessing the logger via the keypad
when in flow mode allows the user to set up the logger. e.g. start time, interval time etc. and view the stored data.
Accessing the logger from the main menu only allows the user to
view the data that has already been stored. If there is no data
stored in the memory the instrument will display the following.
Data is stored in 224 blocks, each block having 240 data points. Every time the logger is started a new block of memory is used.
If one application was to take up all the memory it would use all 224 blocks.
Use scroll to move the cursor to the required option then press
ENTER to select.
3.5.1 Units
Selecting units only informs the user of the flow units that the logger is measuring.
MAIN MENU
No logged data in memory
Press ENTER to continue
MAIN MENU-DATA LOGGER yy-mm-dd hh:mm:ss
Units
List block names
Next block to view
View log as text
View log as graph
Graph Y-axis max.
Download log
Clear log
Memory free
Exit
yy-mm-dd hh:mm:ss
l/s
7
7.3
53760
23