Computer Instructions; Operating Instructions For Ct- 1100 Computer; Battery Compartment; Dot Matrix Display - Energetics CT-1100 Assembly Instruction Manual

Computer Instructions

Training Programs
NO. 1 Led Display:
shows Watt steps
Power On

OPERATING INSTRUCTIONS FOR CT- 1100 COMPUTER

Battery Compartment: 6 x size AA alkaline rechargeable batteries.
Low Battery Warning: If there is no pedal rotation the monitor is running on its batteries only and AUTO POWER OFF will
be activated after 1 minute. During this time if the batteries a low the LOW BATTERY warning LED (top right hand LED on
the dot matrix) will flash and the power will turn off after 10 seconds.
Dot Matrix Display: This display is 8 segments high and 16 segments wide. The vertical segments represent the
resistance setting. There are 16 resistance levels so each segment will represents 2 levels. The horizontal segments
th
represent 1/16 of your workout time. If you select a workout time of 20 minutes then each segment will represent 1
minute15 seconds and so on. The current time vertical segment will flash.
Program Led's: When all program LED's are flashing at the same time then PROGRAMS can be selected or changed.
When a PROGRAM has been selected then only that PROGRAM LED will stay on.
NO. 1 Led Display: This constantly displays WATTS, the amount of power being generated by the users.
NO. 2 Led Display: This can display selected functions, TIME, SPEED, DISTANCE and K/CALORIES. The function to be
displayed can be selected by pressing the SELECT key or all functions can be displayed for 4 seconds each in rotation by
pressing the SCAN key. The function being displayed is indicated by its associated LED.
NO. 3 Led Display: Normally displays HEART RATE unless the resistance level changes. When this happens the display
will show the new resistance level, L1 through L16, for 5 seconds and then return to HEART RATE.
Start/Stop Scan- Button Select- Button to set
training data
13
- -

Battery Compartment

Low Battery Warning
Display Training
Programms
NO. 2 Led Display:
Time, Distance,
for
Speed, Calories
NO. 3 Led Display:
for Pulse Rate and
Resistance Level