Reversing.the.door.swing - Matsui MUF50W10E Instruction Manual

Reversing the Door Swing
Tools required: Phillips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
• Ensure the freezer is unplugged and empty.
GB
• Adjust the two leveling feet to their highest position.
• To take the door off it is necessary to tilt the appliance backward. You should rest the Appliance
on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door. You should rest the freezer
on something solid so that it will not slip during the door change process. Do not lay the
freezer flat as this may damage the coolant system. Ensure the freezer is unplugged and empty.
We recommend that 2 people handle the freezer during assembly.
1. Tilt the fridge carefully. 2 people are required to tilt
the fridge during the door reversing process.
2. Remove the screws and hinge bracket from the base.
3. Slide the door down and remove away from the
freezer.
4. Remove the top hinge pin and spring inside the door
and refit on the opposite side.
Remove the top hinge cover and refit on the opposite
side.
8