Product.overview; Installation; Location - Matsui MUF50W10E Instruction Manual

Product Overview
Freezer Drawers
Thermostat Control Dial
(at the rear)
Ice Tray

Installation

Location

When selecting a position for your freezer you should make sure the floor is flat and firm, and the room is
well ventilated with an average room temperature of between 16°C and 32°C. Avoid locating your freezer
near a heat source, eg. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical
consumption. Extreme cold ambient temperatures may also cause the appliance not to perform properly.
This freezer is not designed for use in a garage or outdoor installation.
Do not drape the freezer with any covering. When installing, ensure that free space is left at the sides. You
may refer to the Overall Space Required in the Specification section. The freezer door can open to the right
or the left, depending on what better suits the location.
• If you want to have the door swing reversed, we recommend that you contact a qualified
technician. You should only try to reverse the door yourself if you believe that you are qualified
to do so.
• All parts removed must be saved to do the reinstallation of the door. You should rest the freezer
on something solid so that it will not slip during the door change process. Do not lay the
freezer flat as this may damage the coolant system. Ensure the freezer is unplugged and empty.
We recommend that 2 people handle the freezer during assembly.
Levelling Feet
Plastic Scraper
GB
7