Reversing The Door Swing - Matsui MTF170W15E Instruction Manual

INSTALLATION

Reversing the Door Swing

Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the
unit on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe
that you are qualified to do so.
1. Remove the screw from the top hinge
cover and then take the cover and the
triangular metal away. Remove the
screws from the top hinge and then take
the top hinge away.
2. Remove the levelling feet. Remove the
screws from the bottom hinge and then
take the bottom hinge away.
3. Lift the door away from the unit. Place it
on a padded surface to avoid scratching.
GB
17