Speaker Output Levels; Speaker Output Levels - Yamaha DSP-AZ1 Owner's Manual

This section explains how to set the speaker output levels using the test tone generator. The "TEST DOLBY SUR." is for balancing the
output levels of the six speakers required for surround sound systems. The "TEST DSP" is for balancing the front effect speakers with the
main speakers for the DSP sound field programs.
I Button/switch to be used for adjustment
A/B/C/D/E PRESET
TV INPUT
TV VOL
TV MUTE
DISC
ON SCREEN LEVEL
SLEEP TEST
TEST
E-
38

SPEAKER OUTPUT LEVELS

MUTE
CH VOLUME
STEREO
EFFECT
PARAMETER
PARAMETER/SET
SET MENU
MENU
PUSH
I Before you begin
1
Set BASS, TREBLE and BALANCE on the front panel
to the center position.
BASS
2
Turn off BASS EXTENSION.
3
Set PARAMETER/SET MENU on the remote control to
PARAMETER.
Cautions
• Since this unit cannot enter the test mode while headphones are
connected to this unit, be sure to unplug the headphones from the
PHONES jack when using the test tone.
• If the headphone is connected while "TEST DOLBY SUR." or
"TEST DSP" is being used, the testing mode will be cancelled.
BALANCE
TREBLE
L R
BASS
EXTENSION
PARAMETER
SET MENU