Controls And Functions; Controls And Functions; Front Panel - Yamaha DSP-AZ1 Owner's Manual

Front panel

1 2 3
INPUT MODE
STANDBY
/ON
1
STANDBY/ON
Turns this unit on (On mode) and off (Standby mode). When you
turn on this unit, you will hear a click and there will be a 4 to
5-second delay before this unit can reproduce sound.
In Standby mode, this unit consumes a small amount of power so it
can respond to the remote control.
2
INPUT MODE
Selects the mode of input for sources that output two or more types
of signals to this unit (see page 44).
Caution
• You cannot control the input mode when you select 6CH INPUT
as the input source.
3
INPUT SELECTOR
Selects the input source (D-TV/LD, CABLE, SAT, VCR 1, VCR 2,
VCR3/DVR, V-AUX, DVD, MD/TAPE, CD-R, TUNER, CD,
PHONO) you want to listen to or watch (see page 42).
4
Remote control sensor
Receives signals from the remote control.
5
SPEAKERS A/B
When pushed in (ON), these buttons turn on the set of main
speakers connected to the A and/or B terminals on the rear panel.
6
Front panel display
Shows information about the operational status of this unit (see
page 11).
E-
6

CONTROLS AND FUNCTIONS

45 6 7 8 9 0 q w e r
INPUT SELECTOR
SPEAKERS
SET MENU
A B
BASS TREBLE
SILENT
PHONES
y u i
6CH
NEXT INPUT STEREO PROGRAM
REC OUT/ZONE 2
EFFECT
BALANCE
SOURCE/REMOTE
D–TV/LD
CABLE
PROCESSOR BASS
DIRECT EXTENSION
SAT
VCR 1
ON OFF VCR 2
VCR 3/DVR
L R
VIDEO AUX
VIDEO AUX
S VIDEO VIDEO L AUDIO R OPTICAL
o p
7
SET MENU +/–
Adjusts the settings and parameter values of SET MENU items.
8
PROCESSOR DIRECT ON/OFF
When pushed in (ON), BASS, TREBLE, BALANCE, and BASS
EXTENSION are bypassed, eliminating any alteration of the
original signal.
9
NEXT
Displays SET MENU items. This button works like
control when using the SET MENU (see page 53).
0
6CH INPUT
Switches between 6CH INPUT mode and normal input modes. 6CH
INPUT mode takes priority over the source selected with INPUT
SELECTOR.
You cannot use DSP sound field programs while using an external
decoder.
q
STEREO/EFFECT
Switches the effect speakers (center, front effect, rear and rear
center) on and off. If you turn off the output of these speakers using
STEREO/EFFECT, all DTS and Dolby Digital audio signals are
directed to the main left and right channels except for the LFE
channel.
Cautions
• When DTS or Dolby Digital signals are mixed, the left and right
main channel signal levels may not match.
• If "1B MAIN SP" on the SET MENU is set to "SMALL" and "1E
LFE/BASS OUT" is set to "SW", or "1E LFE/BASS OUT" is set
to "BOTH", the LFE signals will be output from the subwoofer.
t
VOLUME
DVD
MD/TAPE
CD–R
TUNER
CD
PHONO
on the remote