This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections
Control range 0 – 10
The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces than in one
which has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to as "dead," while a room
with highly reflective surfaces is referred to as "live". The LIVENESS parameter lets you adjust the early reflection decay
rate, and thus the "liveness" of the room.
I P. INIT. DLY (Presence Initial Delay)
This parameter adjusts the delay between the direct sound and the first reflection in the presence sound field.
Control range 1 – 99 ms
The larger the value, the later the first reflection begins.
I S. INIT. DLY (Surround Initial Delay)
This parameter adjusts the delay between the direct sound and the first reflection on the surround side of the sound field.
You can only adjust this parameter when at least two front channels and two rear channels are used.
Control range 1 – 49 ms
The larger the value, the later the first reflection begins. You can only adjust this parameter for the Dolby Digital and DTS
Small value = 0
DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS
Large value = 10