Download Print this page

Yamaha DSP-AZ1 Owner's Manual: Sound Field Program Parameter Editing; Sound Field Program Parameter Editing; Changing Parameter Settings

Yamaha av amplifier owner's manual.
Hide thumbs

Advertisement

SOUND FIELD PROGRAM PARAMETER EDITING

You can enjoy good quality sound with the preset parameters. Although you do not have to change the initial settings, you can change some
of the parameters to better suit the input source or your listening room.
Changing parameter settings
A/B/C/D/E
PRESET
TV INPUT
TV VOL
CH
TV MUTE
DISC
ON SCREEN
LEVEL
2
SLEEP
TEST
PUSH
1
1
Turn on the video monitor.
2
2
Press ON SCREEN repeatedly to select the full
display mode.
ON SCREEN
3
3
Set PARAMETER/SET MENU to PARAMETER.
PARAMETER
SET MENU
4
4
Select a DSP program you want to adjust.
P10 MOVIE THEATER 1
≥ 70mm Spectacle
EFCT TRIM............0dB
P.INIT.DLY......13ms
P.ROOM SIZE......1.0
S.DELAY...............23ms
S.ROOM SIZE......1.0
5
5
Press /
to select the parameter.
MUTE
VOLUME
STEREO
5
EFFECT
PARAMETER
3
SET MENU
6
6
6
Press +/– to change the parameter value.
When you set the parameter to a value other than the factory-
set value, an asterisk mark (*) appears by the parameter name
on the video monitor.
7
7
Repeat steps 4 to 6 above as necessary to change
other program parameters.
Cautions
• The available parameters may be displayed on more than one
OSD page for some of the programs. To scroll through pages,
press / .
• You cannot change parameter values when "16 MEMORY
GUARD" on the SET MENU is set to "ON". If you want to
change the parameter values, set "16 MEMORY GUARD" to
"OFF" (see page 62).
I To reset some of the parameters to the
factory-set values
Select the parameter you want to reset. Then press and hold +/–
until the value temporarily stops at the factory-set value. The
asterisk mark (*) by the parameter name disappears on the video
monitor.
I To reset all of the parameters to the factory-
set values
Use "10 PARAMETER INI" on the SET MENU to reset all of the
parameter values of all DSP programs within the selected group to
the factory-set values (see page 59). This operation resets all of the
parameter values of all DSP programs within that group to the
factory-set values.
E-
95

Advertisement

Table Of Contents

   Also See for Yamaha DSP-AZ1

   Related Manuals for Yamaha DSP-AZ1

Comments to this Manuals

Symbols: 0
Latest comments: